Chapter 1 - Introduction; Specifications - DFI NP101-D16C User Manual

1
Introduction

Chapter 1 - Introduction

Specifications

Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
BIOS
8
• Intel Atom N270 (Diamondville SC) processor
® TM
• 1.6GHz core frequency, 1.10V voltage
• 2.5W thermal design power
• 512KB on-die second level cache
• 533-MT/s FSB
• 22x22 mm, 1.0 mm ball pitch and 437 balls FCBGA
• Intel chipset
®
- Northbridge: Intel
®
- Southbridge: Intel
®
• One 240-pin DDR2 DIMM socket
• Maximum memory supports up to 2GB
• Supports 400MHz and 533MHz DDR2 SDRAM
• 1 PCI Express x1 slot
• 1 PCI slot
• 133/166MHz internal graphics core render frequency at 1.05V
core voltage
• One SDVO port (Port B)
- SDVO slot reversal not supported
• Supports 18-bit dual-channel LVDS
• Supports CRT resolutions up to SXGA+
• Realtek ALC262 2-channel High Definition Audio
• 2x 6W for 8ohm speaker
• Two 24-bit stereo DACs and three 20-bit stereo ADCs
• S/PDIF input/output interface
• Two Realtek RTL8111C PCI Express Gigabit controllers
• Suppor ts 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
• Two SATA ports with independent DMA operation supported
on ports 0 and 2
• Two-mode operation supports legacy mode using I/O space or
an AHCI mode using memory space
• SATA and PATA can be used in a combined function mode
(When SATA is used with PATA, AHCI mode is not supported.)
• Bus Master IDE (PATA) controller
• Supports up to two IDE devices
• Ultra ATA 33
• Award BIOS
• 8Mbit SPI interface BIOS
945GSE GMCH
82801GBM ICH7M