Init Display First; Reset Configuration Data - DFI LanParty UT CFX3200-DR User Manual

3
BIOS Setup
PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
x IRQ Resources
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.

Init Display First

This field is used to select whether to initialize PCI Express or PCI
first when the system boots.
PCI Express Slot When the system boots, it will first initialize the
PCI Slot

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.
102
Phoenix - AwardBIOS CMOS Setup Utility
Init Display First
Reset Configuration Data
Resources Controlled By
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
PCI Latency Timer (Per 8CLK)
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
Maximum Payload Size
: Move Enter: Select
PCI Express x16 graphics card.
When the system boots, it will first initialize
PCI.
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
PnP/PCI Configurations
PCI Express Slot
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enabled
8
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
4096
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults