Table of Contents
Advertisement
Transformer operations
Using your locomotive's ElectroCouplers in the
non-Command environment
T
o uncouple rolling stock from your
locomotive's ElectroCouplers in the
non-Command environment, you must rely
Magnetic coupler on the rolling stock coupled
to your locomotive
Figure 2. Trigger disc operation
on a piece of rolling stock equipped with
Lionel magnetic couplers coupled directly to
your locomotive's ElectroCouplers. The
Remote-Control
Track section
Note!
6
magnetic coupler on the rolling stock will
then react to the magnetic field generated
by a Lionel Remote-Control or Uncoupling
Track section (available separately, 6-65530
for O gauge, 6-65149 or 6-12746 for O-27
gauge). Place your rolling stock's coupler
"trigger disc" over the central coil of a
Remote-Control or Uncoupling Track
section and press UNCOUPLE on the
controller. The magnetic field pulls the disc
downward, and the coupler opens.
Your locomotive's
ElectroCouplers will NOT open
manually or by using a
Remote-Control Track section.
Advertisement
Table of Contents
