Using Your Missile Launcher Locomotive's Electrocouplers In The Non-Command Environment - Lionel Missile Launch Set Owner's Manual

Transformer operations
Using your Missile Launcher Locomotive's ElectroCoupler in the
non-Command environment
Y our Missile Launcher Locomotive is
equipped with one ElectroCoupler
located at the rear of the locomotive. To
uncouple rolling stock from your Missile
Launcher Locomotive's ElectroCoupler in
the non-Command environment, you must
rely on a piece of rolling stock equipped
with Lionel magnetic couplers coupled
directly to your Missile Launcher
Locomotive's ElectroCouplers. As illustrated
in Figure 3, the magnetic coupler on the
rolling stock will then react to the magnetic
Magnetic coupler on the rolling stock coupled
to your Missile Launcher Locomotive
Figure 3. Trigger disc operation
field generated by a Lionel Remote-Control
Track section (available separately). Place
your rolling stock's coupler "trigger disc"
over the central coil of a Remote-Control
Track section and press UNCOUPLE on the
controller. The magnetic field pulls the disc
downward, and the coupler opens.
Your Missile Launcher
Note!
Locomotive's ElectroCouplers
will NOT open manually or by
using a Remote-Control Track
section.
6
Remote-Control Track
section