Using Your Locomotive's Electrocouplers In The Non-Command Environment - Lionel Coal Train Set Owner's Manual

Transformer operations
Using your locomotive's ElectroCouplers in the
non-Command environment
T o uncouple rolling stock from your
locomotive's ElectroCouplers in the
non-Command environment, you must rely
on a piece of rolling stock equipped with
Magnetic coupler on the rolling stock coupled
to your locomotive
Figure 2. Trigger disc operation
Lionel magnetic couplers that can be
coupled directly to your locomotive's
ElectroCouplers. The magnetic coupler on
the rolling stock will then react to the
magnetic field generated by a Lionel
Remote-Control or Uncoupling Track
section (available separately, 6-65530
for O gauge, 6-65149 or 6-12746 for
O-27 gauge). Place your rolling stock's
coupler "trigger disc" over the central coil
of a Remote-Control or Uncoupling Track
section and press UNCOUPLE on the
controller. As illustrated in Figure 2, the
magnetic field pulls the disc downward, and
the coupler opens.
Remote-Control
Track section
Note!
6
Your locomotive's
ElectroCouplers will NOT open
manually or by using a
Remote-Control Track section.