Using Your Locomotive's Electrocouplers In The Non-Command Environment - Lionel GP-7 Owner's Manual

Transformer operations
Using your locomotive's ElectroCouplers in the
non-Command environment
T o uncouple rolling stock from your
locomotive's ElectroCouplers in the
non-Command environment, you must rely
Magnetic coupler on the rolling stock coupled
to your locomotive
Figure 2. Trigger disc operation
on a piece of rolling stock equipped with
Lionel magnetic couplers coupled directly to
your locomotive's ElectroCouplers. The
Remote-Control
Track section
Note!
6
magnetic coupler on the rolling stock will
then react to the magnetic field generated
by a Lionel Remote-Control Track section
(available separately, 6-65530 for O gauge,
6-65149 or 6-612746 for O-27 gauge).
Place your rolling stock's coupler "trigger
disc" over the central coil of a Remote-
Control Track section and press UNCOUPLE
on the controller. The magnetic field pulls
the disc downward, and the coupler opens.
Your locomotive's
ElectroCouplers will NOT open
manually or by using a
Remote-Control Track section.