Table of Contents
Advertisement
Transformer operations
Using your locomotive's ElectroCouplers in the non-Command
environment
T
o uncouple rolling stock from your
locomotive's ElectroCouplers in the
non-Command environment, you must rely
Magnetic coupler on the rolling stock coupled
to your locomotive
Figure 2. Trigger disc operation
Your locomotive's ElectroCouplers will NOT open manually or by using a
Note!
Remote-Control Track section.
on a piece of rolling stock equipped with
Lionel magnetic couplers coupled directly to
your locomotive's ElectroCouplers. The
magnetic coupler on the rolling stock will
then react to the magnetic field generated
by a Lionel Remote-Control Track section
(available separately, 6-65530 for O gauge,
6-65149 or 6-12746 for O-27 gauge). Place
your rolling stock's coupler "trigger disc"
over the central coil of a Remote-Control
Track section and press UNCOUPLE on the
controller. The magnetic field pulls the disc
downward, and the coupler opens.
Remote-Control
Track section
couplers in Command Control.
6
See page 11 to learn how to release the
Advertisement
Table of Contents
