Page 3
Uncoupling your Heavyweight Passenger Cars ach Heavyweight Passenger Car features two operating couplers. Figure 1 illustrates the location of the uncoupling mechanisms on your cars. To open the couplers, position the truck on a Remote-Control Track section (available separately, 6-65530 for O gauge; 6-12746 or 6-65149 for O-27 gauge;...
Page 4
Turning on the lights in your Heavyweight Passenger Cars ou will find a light switch on the bottom of your Heavyweight Passenger Cars. As illustrated in Figure 2, the switch is located inside one of the tool boxes. Slide this switch toward one end of the car to turn on the lights or toward the other end of the car to turn off the lights.
Page 5
The red marker lights and drumhead lights are LEDs, which are expected to last for Note! the life of this product. Only an authorized Lionel Service Center should service the LEDs. 1. Remove the vestibule roof screws at both ends of the car, inserting your screwdriver through the hole in the frame.
Page 6
Replacing the lamps in your Heavyweight Passenger Cars (continued) Bottom of the car Vestibule frame screws Vestibule Remove screw Vestibule/roof screw Figure 3. Vestibule removal...
Page 7
Replacing the lamps in your Heavyweight Passenger Cars (continued) See Figure 3 for removal Remove Unplug circuit board vestibule screw Vestibule Inside roof Remove screws Uncoupling mechanism Spread sides Light panel apart to clear tabs Light ON/OFF switch Uncoupling mechanism Remove screws Remove vestibule screw See Figure 3 for...
Lionel L.L.C. or an authorized Lionel L.L.C. Service Center, together with proof of original purchase will, at the option of Lionel L.L.C., be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a replacement is not available, a refund of the original purchase price will be granted.