Page 2
Silencing the background sounds Installing the Lionel Sound Activation Button for conventional operation Notes Limited Warranty/Lionel Service The following Lionel marks may be used throughout this instruction manual and are protected under law. All rights reserved. Lionel ® , TrainMaster ®...
Page 3
Operating your Halloween Boxcar our Halloween Boxcar was designed to operate at approximately 6 to 18 volts (AC). When you power up the boxcar on the track, you will hear the howling of the wind. Always operate the Halloween Boxcar with a lighted locomotive, an illuminated car, Note! or lighted track bumpers.
Adjusting the volume se the volume control knob on the underside of the Halloween Boxcar to adjust the volume. Refer to Figure 1. Volume control knob Sound ON/OFF switch Figure 1. Volume control knob and switch locations...
Page 5
Silencing the background sounds o silence the background sounds, slide the switch on the underside of the boxcar to the OFF position. The user-activated sounds are not silenced. Refer to Figure 1 above for the location of the switch.
Installing a Lionel Sound Activation Button for conventional operation f your transformer lacks WHISTLE and BELL buttons, you will need to install Lionel no. 610-5906-001 Sound Activation Buttons (available separately) to activate the locomotive’s whistle and bell sounds. Connect the buttons as shown below. Be sure that all track power passes through the Sound Activation Button(s).
Lionel L.L.C. or an authorized Lionel L.L.C. Service Center, together with proof of original purchase will, at the option of Lionel L.L.C., be repaired or replaced, without charge for parts or labor. In the event the defective product cannot be repaired, and a replacement is not available, a refund of the original purchase price will be granted.