Table of Contents
Advertisement
Transformer operations
Installing a Lionel Sound Activation Button
T
o activate the bell and whistle sounds
when operating your locomotive with
conventional transformers, you may need to
install Lionel no. 610-5906-001 Sound
Activation Buttons (available separately) if
your transformer is not equipped to activate
For AC transformers with a horn/whistle button
Black wire
For AC transformers lacking a horn/whistle button
Lionel no. 610-5906-001
Sound Activation Button
for activating the
whistle
The no. 610-5906-001 button works with any Lionel AC transformer except
Note!
no. 6-4690 Type MW. Transformers made by other manufacturers may not be
compatible with RailSounds.
1 2
Existing wire
Red wire
Lionel no. 610-5906-001
Sound Activation Button for
activating the bell
Red wire
Black wire
these features. Connect the button(s) as
shown below.
All track power must feed through
Note!
the Sound Activation Buttons. Do
not bypass the buttons.
Common/Ground/U
POWER
SUPPLY
Power/A
Existing wire
Red wire
Wire
nut
Lionel no. 610-5906-001
Sound Activation Button for
activating the bell
7
Common/Ground/U
POWER
SUPPLY
Power/A
Advertisement
Table of Contents
