CyberData 11146 Operation Manual page 3

Revision Information
Revision 930427G, which corresponds to firmware version 6.3.1, was released on November 13,
2013, and has the following changes:
CyberData Corporation
• Updates the description of the
Table 1-1, "Product Specifications".
• Updates Section 2.3.1.2, "Pin 3, 4, and 5—Positive/Negative 600-Ohm Audio Output/Audio
Ground Reference" to the following text:
"This output allows direct connection to paging amplifiers requiring a "Page Port" type input
that meets a balanced 600 Ohm 5VPP
• Adds Section 2.6.1, "Command Interface Post
Page Port Output setting to
signal."
Commands".
930427G
"Balanced 600 Ohm 5VPP" in
Operations Guide