Assembling And Installing The Front Brake Master Cylinder - Yamaha T135SE Service Manual

1
YamahaT135.COM
Yamaha T135 Service Manual
1
2
1
7-27
FRONT BRAKE
3. Check:
9brake master cylinder reservoir 1
Cracks/damage → Replace.
9brake master cylinder reservoir diaphragm 2
Damage/wear → Replace.
4. Check:
9brake hose 1
Cracks/damage/wear → Replace.
EAS00598
ASSEMBLING AND INSTALLING THE
FRONT BRAKE MASTER CYLINDER
w
9 9 Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
9 9 Never use solvents on internal brake com-
ponents.
Recommended brake fluid
DOT 3 or 4
1. Install:
9brake master cylinder 1
NOTE:
9Install the brake master cylinder holder with the
mark facing up.
9Adjust the brake master cylinder to the proper
angle.
9First, tighten the upper bolt, then the lower bolt.
CHAS
11 Nm (1.1 m·kg, 8.0 ft·lb)