Assembling The Starter Motor; Installing The Starter Motor - Yamaha T135SE Service Manual

YamahaT135.COM
Yamaha T135 Service Manual
STARTER MOTOR (T135SE)
a
8-21
5. Measure:
9brush length a
Out of specification → Replace the brush-
es as a set.
Brush length wear limit
3.5 mm (0.14 in)
6. Measure:
9brush spring force
Out of specification → Replace the brush
springs as a set.
Brush spring force
3.92–5.88 N (400–600 gf)
7. Check:
9gear teeth
Damage/wear → Replace the armature.
EAS00772

ASSEMBLING THE STARTER MOTOR

1. Install:
9O-ring
9armature
(in start motor front cover 1)
9O-ring
9starter motor yoke
9starter motor front cover bolts
(with washers)
9O-ring
NOTE:
Align the mark a on the starter motor yoke with
the mark b on the starter motor front cover.

INSTALLING THE STARTER MOTOR

For installation, reverse the removal procedure.
ELEC