Installing The Kickstarter - Yamaha T135SE Service Manual

1
b
3
a
YamahaT135.COM
Yamaha T135 Service Manual
2
90˚
4
4-74
KICKSTARTER

INSTALLING THE KICKSTARTER

1. Install:
9kickstarter ratchet gear 1
(on to the kickstarter shaft)
9kickstarter shaft 2
9kickstarter spring
NOTE:
9Offset the kickstarter ratchet gear as shown,
and then align the spline to install the kick-
starter ratchet gear.
9Hook the kickstarter spring end onto the pin
a in the crankcase, and then turn the kick-
starter shaft counter-clockwise to 3/4 turns b.
2. Install:
9guide stopper 3
9guide stopper bolts
9kickstarter gear 4
3. Install:
9crankcase
Refer to "CRANKCASE".
4. Install:
9engine
Refer to "REMOVING THE ENGINE".
5. Install:
9starter motor (T135SE)
Refer to "STARTER MOTOR (T135SE)" in
chapter 8.
6. Install:
9oil pump assembly
Refer to "OIL PUMP".
9generator
Refer to "GENERATOR AND STARTER
CLUTCH".
9shift shaft
Refer to "SHIFT SHAFT".
9clutch
Refer to "CLUTCH".
7. Install:
9gasket
9dowel pins
9crankcase cover bolts
9crankcase cover (right)
9oil level plug
8. Install:
9kickstarter lever
9kickstarter lever nut
ENG
12 Nm (1.2 m•kg, 9.0 ft•lb)