CHECKING THE CARBURETOR JOINT AND INTAKE MANIFOLD
1
2
YamahaT135.COM
Yamaha T135 Service Manual
CLEANING THE AIR FILTER ELEMENT/
ADJUSTING THE CLUTCH RELEASE SYSTEM/
1
2
6. Install:
9center panel (lower)
Refer to "INSTALLING THE CENTER PAN-
ELS".
EAS00086
ADJUSTING THE CLUTCH RELEASE
SYSTEM
1. Adjust:
9clutch release system
MMMMMMMMMMMMMMMMMMMMMMMM
a. Loosen the locknut 1.
b. Turn the adjusting screw 2 in completely,
then turn the adjusting screw out the speci-
fied number of turns.
Adjusting screw:
1/8 turns out
c. Tighten the locknut.
NOTE:
Hold the adjusting screw and tighten the lock-
nut.
LLLLLLLLLLLLLLLLLLLLLLLL
EAS00094
CHECKING THE CARBURETOR JOINT
AND INTAKE MANIFOLD
1. Remove:
9side cowlings (left and right)
9center panels (upper and lower)
9front cowling
9rear cowlings (left and right)
9inner panel
Refer to "COVERS".
2. Check:
9carburetor joint 1
9intake manifold 2
Cracks/damage → Replace.
Refer to "CARBURETOR" in chapter 6.
3-21
CHK
ADJ
8 Nm (0.8 m•kg, 6.0 ft•lb)