Microphone Control; Speakerphone Calls; Group Listen - NEC Univerge DT310 User Manual

Unless you preselect, Trunk Group Routing
Note 2:
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
If you have a DSS Console, you may be able to
Note 3:
press a DSS Console key to chain to a stored
number.
To dial a Group Speed Dialing number:
1.
Press the Speaker key.
2. Dial 814 (default Service Code).
-OR-
Press the Group Speed Dialing key (Service Code
851:28).
To preselect, press a Line key in step 1 (instead
Note:
of pressing Speaker).
3.
Dial the Group Speed Dial buffer number ( none at
default).
Initially, there are no Group Speed Dial
Note 1:
buffers assigned.
Unless you preselect, Trunk Group Routing
Note 2:
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
Note 3: If you have a DSS Console, you may be able to
press a DSS Console key to chain to a stored
number.

MICROPHONE CONTROL

1.
Press the MIC key.
2. A lit MIC LED indicates that the MIC is on.

SPEAKERPHONE CALLS

1.
Press the Speaker key and the Speaker LED lights.
2. Ensure that the MIC LED is lit.
3.
Place an internal or outside call.
4. Converse.
5.
Press the Speaker key to disconnect the call.
Note: The handset may be used at any time during
the conversation. To resume handsfree
operation or to monitor a call, press the
Speaker key (the Speaker LED lights) and
replace the handset.

GROUP LISTEN

To initiate Group Listen:
1.
Place or answer a call using the handset.
2.
Press the Speaker key twice (do not hang up).
Note 1: The Speaker LED flashes.
27