NEC Univerge DT310 User Manual page 34

Trunk Queuing
After pressing a busy Line key and receiving the trunk
busy indication:
1. Press Trunk Queuing/Camp On key (Service Code
851:35).
2.
Replace the handset.
When a line is available, your telephone will
Note:
ring; lift the handset and place the call.
Last CO/PBX Number Redial
1. Without lifting the handset,
press the Redial key.
2.
To redial the last number, press #.
-OR-
Search for the desired number from the Redial List by
pressing the List Softkey and then the Redial
Softkey.
3.
Press the Up Arrow/Down Arrow or VOLUME UP/
VOLUME DOWN keys to search for the desired
number.
4. Lift the handset or press Speaker to place the call.
LIST MENU
Redial CID
Speed Dial – System/Group
To dial a System Speed Dialing number:
1. Press the Speaker key.
2.
Dial 813 (default Service Code).
-OR-
Press the Redial key.
-OR-
Press the System Speed Dialing key (Service Code
851:27).
To preselect, press a Line key in step 1 (instead
Note:
of pressing Speaker).
3. Dial the Station Speed Dial buffer number
(Default: 000~999).
The stored number dials out.
2-13 WED 5:28PM
92142622000
MW
Note 1: Initially (at default), there are 1000 System
Speed Dial buffers.
26
NEC
Camp Barg