NEC Univerge DT310 User Manual page 21

1.
digits).
* For the assignment of the keys, confirm to the
Telephony Server Administrator.
** When two telephone numbers are assigned on
A side and B side of "One-Touch Speed Dial key",
user can switch the side by PAGE key (Soft key).
Following picture shows LCD indication of
Programmable keys.
Appropriate icons are displayed according to the
using feature. These displays cannot be changed
by user.
Following pictures shows each LCD indication
when One-Touch Speed Dial key is set to
Programmable key. Following picture shows the
indication of each status.
When Station line/Trunk line are assigned.
No icons are displayed.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, refer to To
Register Name On One-Touch Speed Dial key.
When any features using feature access code
are assigned.
Icons turn black.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, refer to To
Register Name On One-Touch Speed Dial key.
(9) Scroll Key
This key is used to turn over the page of 8LD
display.
(10)Recall
Press key to finish the call and hear the dial tone.
(11)Feature
Used to activate any features as terminal setup
functions, etc. and to program One-Touch Speed
Dial Keys.
13