Operation; Front Panel Features; Front Panel Operation - Extron electronics XTP T USW 103 User Manual

Three input switcher with an integrated xtp transmitter
Hide thumbs Also See for XTP T USW 103:
Table of Contents

Advertisement

Operation

This section describes the front panel features of the XTP T USW 103 and provides front
panel operations. Topics in this section include:

Front Panel Features

SWITCH
Figure 10.
a
b
c
d
e

Front Panel Operation

The input selection buttons are used to manually select inputs 1 through 3 or enable and
disable device modes. The LEDs indicate status and provide feedback of the currently
selected input. Press and hold the input selection buttons in the combinations shown in the
table below to enable or disable device modes.
Mode
Executive (disabled by default)
Auto switch
(prioritize the highest numbered active input)
Normal switch (default switch mode)
Front panel operations can also be performed remotely with SIS commands (see
Configuration and Control
(see
Front Panel Features
Front Panel Operation
AUTO
1
CONFIG
MODE
a
b
XTP T USW 103 Front Panel Features
Auto Switch LED — Lights when the transmitter is in auto switch mode.
Config port — Connect a host device to the front panel mini USB Config port.
Input selection buttons — Select inputs 1 through 3 or modes of operation. The
corresponding LEDs light to indicate the active input.
Status LEDs — The Signal LEDs light to indicate the signal presence of each input.
The HDCP LEDs light when the signal on the corresponding input is HDCP-compliant.
Input 1 (the VGA connector) does not have an HDCP LED.
Audio Signal Clip LED — Lights when the analog audio input signal is -3 dBFS or
above. The light remains lit for 200 ms after the audio input signal drops below -3 dBFS.
Front Panel Button Combinations for Device Modes
XTP System Configuration Software
3
2
AUTO
NORMAL
c
Button Combination Indicator Response
1, 2, and 3
1 and 3
1 and 2
on page 13) or the XTP Configuration Software
on page 18).
STATUS
AUDIO
1
2
3
SIGNAL CLIP
SIGNAL
HDCP
XTP T USW 103
d
e
All front panel LEDs
blink 3 times
Auto Switch LED
lights
Auto Switch LED
turns off
SIS
XTP T USW 103 • Operation
10

Advertisement

Table of Contents
loading

Table of Contents