Rotary Override; Midi Page - Kurzweil Forte 7 Musician's Manual

Global Mode

MIDI Page

In Multi Edit Mode, if a pedal is selected which has a pedal override enabled in Global
mode, a message "Global Pedal Override is enabled" will display when that pedal is viewed to
remind you that the Global mode pedal override settings are being used instead of the Multi
mode pedal settings.

Rotary Override

By default KB3 organ programs have the Slow/Fast speed control for the Rotary speaker
effect assigned to the Variation Button and the Sustain Pedal (SW1). The Rotary Override
parameter allows you set the sustain pedal to function as sustain for all KB3 Programs,
instead of Rotary Slow/Fast. The Variation button will always control the Rotary speed,
regardless of this parameter's setting.
MIDI Page
The Forte can transmit and receive MIDI via its MIDI ports and USB. The MIDI page in
Global Mode allows you to configure how this will be handled.
10-12
Parameter
Destination
ChangeMultis
Bank Select
PrgChangeMode
LocalKbdChan
SysExID
Range of Values
NONE, LOCAL, MIDI,
MIDI+LOCAL, USB,
USB+LOCAL, USB+MIDI,
USB+MIDI+LOCAL
Immediate, AllKeysUp
Ctl 0, Ctl 32, Ctl 0/32
Extended, K2600
None, 1 to 16
0 to 127
Default Value
USB+MIDI+LOCAL
Immediate
Ctl 0/32
Extended
None
0