Once A Feature Is Programmed; To Access Another Feature In The Same Menu; To Select Another Menu; To Exit Learn Routine - Viper 300 ESP Installation Manual

6. Release the Valet

once a feature is programmed

I
Other features can be programmed within the same menu.
I
Another menu can be selected.
I
The learn routine can be exited if programming is complete.

to access another feature in the same menu

1. Press and release the Valet
just programmed to the next one you want to program.
2. Then press the Valet
For example, if you just programmed the third feature in the menu and you would like to program the seventh
feature in the menu, you would press and release the Valet
more and HOLD it. The siren would chirp seven times to confirm access to the seventh feature.

to select another menu

1. Press and HOLD the Valet
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which menu
has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you desire to program a
feature in Menu #2, you press and HOLD the Valet
indicating access to Menu #2.
to exit the learn routine
To exit the learn routine, do one of the following:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the Valet ® /Program switch too many times.
© 2000 Directed Electronics, Inc. Vista, CA
® /Program button.
® /Program switch the number of times necessary to advance from the feature you
® /Program switch once more and HOLD it.
® /Program switch.
® /Program switch four times and then press it once
® /Program button. After three seconds, the siren chirps twice
19