Before Operating; Clean The Oven Before First Use - Sharp AX-1110IN Operation Manual With Cookbook

BEFORE OPERATING

• Before operating your oven, make sure you read
and understand this operation manual completely.
• Before the oven can be used, follow these
procedures:
1. Place the drip tray correctly. See page EN-8.
2. See below for getting started.
3. Follow directions on the right side for clean the
oven before first use.
Getting Started
Your oven has an Energy Save Mode. This facility saves
electricity when the oven is not in use.
P R O C E D U R E
1
Plug the oven into a power point.
Nothing will appear on the display at this time.
2
Open the door. The display will show ".0".
The oven lamp will light while the door is open.
3
Close the door.
Now you can ready to use the oven.
CAUTION:
In Energy Save Mode, if you do not operate the oven
for 3 minutes or more (e.g. after closing the door, or
pressing STOP/CLEAR, or at the end of cooking),
you will not be able to operate the oven until you open
and close the oven door.
NOTE:
When you set Child Lock or Demonstration Mode,
Energy Save Mode will be cancelled temporary.
STOP/CLEAR
1. Press STOP/CLEAR if you make a mistake during
programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.
CLEAN THE OVEN
BEFORE FIRST USE
You may detect smoke or a burning smell when using
the grill for the first time, this is normal and not a sign
that the oven is out of order. To avoid this problem,
when first using the oven, operate the grill without food
for 20 minutes.
PREPARATION
Ventilate the room.
1
Ensure that no food is in the oven.
Enter the time by pressing TIME
(20.00).
2
Press GRILL and
START /+1min.
WARNING:
The oven door, outer cabinet, oven cavity and
especially the grill heating element will become hot.
EN – 11
P R O C E D U R E
x 1
x 2
x 1