You Will Need; Assembly Instructions - Master Chef S480 Assembly Manual

AssEMBLY iNstRuCtioNs

1
dB
dJ
Front View
dJ
Close Up
2
dB
dc
Left Side View
ProPAne Model onlY
Note: You will need two people for this step.
Assemble the tank exclusion (DC) to the left and
right cart side panels (DB, DA), as shown.
Note: the left cart side panel (DB) will have
large holes on the end of the legs for
dA
assembling the wheel axle (Di).
Note: turn Cart assembly over. front panel
should be facing upward.
Assemble the bottom shelf (DC) to the rear, left
dA
and right cart side panels (DB, DA), as shown.

YOU WILL NEED:

2 3
X 4 X 4
6
AssEMBLY iNstRuCtioNs
3
df
df
dG
dH
7
7
4
dd
dJ
dA
dB
Back View
Note: turn Cart assembly upside down.
a. Place wheel (DF) and wheel spacer (#7) onto
dG
wheel axle (DH). "Cone" side of wheel should
be against cart side panel, figure B.
8
11
b. Insert wheel axle assembly (DH) through
wheel axle hole in the front and rear, of the left
cart side panel (DB), as shown.
c. To complete wheel assembly, position the
wheel spacer (#7), wheel (DF), wheel washer
(#11) and hitch pin (#8), onto wheel axle (DG),
as shown.
d. Insert wheel cap (DG) into wheel (DF).
e. Insert end caps (DE) into cart side panel,
right (DA).
YOU WILL NEED:
6 7 11 8 8
7
X 2 X 1 X 1
Assemble the front panel (DD) to the left and
right cart side panels (DB, DA), as shown.
Ensure that the slots on the tank exclusion (DJ)
align with the slots on the front panel (DD).
nAturAl GAs Model Will not
HAve tAnK eXclusion (dJ),
sHoWn in iMAGe.
YOU WILL NEED:
5
X 6
7