Introducing Your Mansfield Wood Stove - HearthStone Mansfield 8011 Owner's Manual

Congratulations! You have just invested in a most unique
wood burning stove – the Mansfield Wood Burning Stove
from HearthStone Quality Home Heating Products Inc®.
The Mansfield, model 8011, is our largest and one of the
cleanest burning, EPA certified, non-catalytic wood
burning stoves. At 3.2 cubic feet capacity and 2.8 grams
per hour particulate you can be proud to join the
HearthStone family with our Premier Wood Burning
Stove. The generous depth allows for straight in loading
of wood up to 20 inches long!
Your purchase insures years of clean, comfortable heat
with minimal maintenance. You will receive the benefits
of the most advanced technology in wood burning without
the cost and maintenance requirements of a catalytic
stove. The Mansfield blends modern technology with the
unique beauty and heating qualities of soapstone
(traditionally renowned for its even heat production and
long heat retaining ability). We trust that you will
appreciate the quality of our handcrafted product.
Please read this manual in its entirety. Its purpose is to
familiarize you with your stove's safe installation, proper
break-in, operation and maintenance. It contains
information that will be useful to you now and in years to
come, so keep it handy and refer to it as needed.
Use these instructions as well as national, state, and local
building codes to install your stove. Be sure to maintain
the designated stovepipe and stove clearances to walls,
ceilings, hearth, and other combustible surfaces. This will
help reduce the risk of fire. Failure to follow these
instructions can result in property damage, bodily injury,
and even death.
Locate your stove in a safe, convenient, open area; away
from traffic flow, doors, and hallways; and near a
chimney and chimney connector. Review the proper
clearance measurements from combustible surfaces. You
can safely reduce required clearances in most cases with a
special connector pipe and special wall coverings as
HearthStone Quality Home Heating Products Inc ®
Introducing Your
Mansfield Wood Stove
specified by this manual, the NFPA 211 codes, and your
local authorities having jurisdiction.
Keep furniture, drapes, curtains, wood, paper, and other
combustibles far away from the stove. Never install the
stove in a location where gasoline, kerosene, charcoal
lighter fluid or other flammable liquids are used or stored.
Locate the stove centrally in your living area to allow the
heat to travel naturally to distant rooms. We recommend
that you do not locate your stove in an uninsulated
basement. The amount of radiant energy required to heat
concrete basement walls is so great that most of the usable
heat is absorbed by them and lost.
SAFETY NOTICE:
A HOUSE FIRE MAY RESULT IF THIS
STOVE IS NOT INSTALLED PROPERLY.
FOR YOUR SAFETY, CAREFULLY
FOLLOW THE INSTALLATION
DIRECTIONS. CONTACT LOCAL
BUILDING OR FIRE OFFICIALS ABOUT
RESTRICTIONS AND INSTALLATION
INSPECTION IN YOUR AREA.
The performance of your stove depends on many
variables. Since all installations are unique, the general
information and operating procedures presented here can
only serve as useful guidelines rather than hard and fast
rules. Should you have any questions, do not hesitate to
contact your dealer for additional information.
Validate your warranty - return your warranty
registration card to HearthStone within 30 days of
purchase. Once your warranty has been validated by
returning your warranty card, contact your dealer for any
necessary warranty service.
This stove is manufactured and warranted by:
HearthStone Quality Home Heating Products Inc®
317 Stafford Ave.
Morrisville, VT. 05661
2
Mansfield Model 8011