Table of Contents
Advertisement
3.
Remove the accessory Wrench (74) from the rear of the Circular Saw.
(See Figure E.)
4.
Depress the Spindle Lock Button (40) to keep the Saw Blade (83) from turning.
(See Figure E.)
5.
Use the accessory Wrench (74) to remove the Blade Bolt (85). Then, remove the
Outer Flange (84). Raise up the Lower Guard (78) and remove old Saw Blade
(83). (See Figure E.)
6.
Install a new Saw Blade (83). Lower the Lower Guard (78) to its normal
operating position. Replace the Outer Flange (84) and Blade Bolt (85).
NOTE: Make sure to firmly tighten the Blade Bolt (85). (See Figure E.)
FIGURE E
7.
Release the Spindle Lock Button (40). Then, reattach the accessory Wrench (74)
to the rear of the Circular Saw. (See Figure E.)
The Power Switch:
1.
The Power Switch (9) automatically locks to its "OFF" position to prevent acci-
dental starting. To turn on the Saw depress the Lock-Off Button. Then squeeze
the Power Switch, and release the Lock-Off Button. To turn off the Saw, release
pressure on the Power Switch. (See Figure F, next page.)
SKU 91757
For technical questions please call 1-800-444-3353
SAW BLADE
(83)
SPINDLE LOCK
BUTTON
(40)
LOWER GUARD
(78)
WRENCH
(74)
OUTER FLANGE
(84)
BLADE
BOLT
(85)
PAGE 12
Advertisement
Table of Contents
