Table of Contents
Advertisement
13.
Before using the Circular Saw, make sure the Saw Blade is properly
mounted on the Saw Spindle. Make sure the Saw Blade is balanced, and is
not cracked or bent. Make sure the rotational arrow on the blade is oriented the
same as the rotational arrow on the lower guard.
14.
The Saw Blade will become hot while cutting. Allow the Saw Blade to
completely cool before touching.
15.
Allow the Saw Blade to spin up to full speed before feeding it into the
workpiece. Do not force the Saw Blade into the workpiece when cutting. Apply
moderate pressure, allowing the Saw Blade to cut without being forced. When
turning off the Saw, allow the Saw Blade to spin down and stop on its own. Do
not press against the Saw Blade to stop it.
16.
Turn off the Saw and allow the Saw Blade to stop on its own if the Saw
Blade is to be backed out of an uncompleted cut.
17.
Industrial applications must follow OSHA requirements.
18.
The Laser (51) on the Circular Saw is a Class 2 with a maximum radiation of
1mW and 650 wavelength. Do not stare directly at the Laser beam. A hazard
may exist if you deliberately stare into the beam. Never aim the Laser beam at
any person, animal, or an object other than the workpiece.
19.
Make sure the Laser (51) beam is aimed at a sturdy workpiece without
reflective surfaces. Reflective surfaces are not suitable for Laser applications,
as the reflective surface may direct the Laser beam back at the operator, causing
potential eye damage.
20.
Do not attempt to alter the Laser (51) or replace it with a different type.
Doing so may result in hazardous radiation exposure.
21.
Use the right tool or attachment for the right job. Do not attempt to force a
small tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not in-
tended.
22.
Always turn off the Circular Saw and unplug the Power Cord (13) from its
electrical outlet before changing accessories, making adjustments, or
performing inspection, maintenance, or cleaning procedures.
23.
WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
SKU 91757
For technical questions please call 1-800-444-3353
PAGE 10
Advertisement
Table of Contents
