[Wi-Fi Setup] Menu - Panasonic Lumix DMC-FZ1000 Owner's Manual

12. Using the Wi-Fi function

[Wi-Fi Setup] Menu

Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
MENU
[LUMIX CLUB]
• P283
Refer to for details.
[PC Connection]
•
For details on how to enter characters, refer to
•
If you are using the PC with standard settings, you do not need to change the workgroup.
[Device Name]
[NFC Operation]
Acquires or changes the "LUMIX CLUB" login ID.
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is "WORKGROUP".)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Exit the menu after it is set.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
•
For details on how to enter characters, refer to
section on P55.
•
A maximum of 32 characters can be entered.
Configures the settings for the NFC function.
[ON]:
NFC function is worked.
[OFF]
297
" "
Entering Text section on P55.
" "
Entering Text