Changing The Information Displayed On The Playback Screen - Panasonic Lumix DMC-FZ1000 Owner's Manual

3. Basic Operation

Changing the information displayed on the playback screen

Press [DISP.] to switch the monitor screen.
•
Screen will switch as follows:
With
¢1
information
3:2
L
1/98 1/98 98
2
F2.8 60 AWB AWB
0
00
¢1 If approximately 1 minute elapses without an operation being performed, part of the display
will disappear. Press [DISP.] to make the display reappear. This operation is to prevent
screen burn-in and is not a malfunction.
¢2 Not displayed while using the playback zoom or during motion picture playback, sequential
playback, panorama playback or a slide show.
¢3 This is displayed if [Highlight]
•
Histogram (color) is displayed in R (red), G (green), B (blue), and Y (luminance) during the
playback.
Detailed
information
¢2
display
F2.8 60
0
AWB
WB WB
AFS
ISO ISO
200
P
STD. STD. STD.
s
3:2
100-0001
L RGB
(P72) in the [Custom] menu is set to [ON].
71
Histogram
¢2
display
F2.8 60
0
ISO
200
1/98 100-0001
Without
¢1, 2, 3
information
Without
information