Panasonic Lumix DMC-FZ1000 Owner's Manual page 349

14. Others
Monitor/Viewfinder
The Monitor/Viewfinder turns off although the camera is turned on.
•
If no operations are performed during the set time period, [Auto LVF/Monitor Off]
activated, and the Monitor/Viewfinder turns off.
•
When an object or your hand is positioned near the eye sensor, the Monitor display may switch
to the Viewfinder display.
The Monitor/Viewfinder is too bright or dark.
•
Check [Monitor Luminance] setting.
•
Perform [Monitor Display]/[Viewfinder].
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
The picture is not displayed on the monitor.
•
Does the picture appear on the viewfinder?
> Press [LVF] to switch to monitor display.
•
Is the monitor switched off?
> Switch the display by pressing [DISP.].
Monitor and viewfinder do not switch when [LVF] is pressed.
•
It is only displayed on the monitor when the camera is connected to a PC or printer.
Black, white, red, blue and green dots appear on the Monitor/Viewfinder.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the monitor.
• In dark places, noise may appear to maintain the brightness of the monitor.
(P57)
(P50)
(P49)
(P57)
(P64)
349
(P51) is