Panasonic Lumix DMC-FZ1000 Owner's Manual page 315

13. Connecting to other equipment
Selecting a single picture and printing it
1
Press 2/1 to select the picture and then press
[MENU/SET].
2
Press 3 to select [Print start] and then press [MENU/SET].
•
Refer to P316
•
Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
1
Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
[Multi Select]
[Select All]
[Print Set (DPOF)] Prints the pictures set in [Print Set] only.
[Favorite]
3
Press 3 to select [Print start] and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
•
Refer to P316
•
Disconnect the USB connection cable after printing.
for the items that can be set before starting to print the pictures.
Multiple pictures are printed at one time.
Press 3/4/2/1 to select the pictures and then press [MENU/
•
SET].
(When [MENU/SET] is pressed again, the setting is canceled.)
After the pictures have been selected, press 2 to select [OK], and
•
then press [MENU/SET].
Prints all the stored pictures.
Prints the pictures set as favorites only.
for the items which can be set before starting to print the pictures.
315
PictBridge Pi PictBridge ctBridge
(P245)
(P244)