Panasonic Lumix DMC-FZ1000 Owner's Manual page 359

14. Others
An unreadable language was selected by mistake.
•
Press [MENU/SET], select the [Setup] menu icon [
desired language. (P53)
Part of the picture is flashing in black and white.
•
This is a highlight function showing the white saturated area.
A red lamp sometimes turns on when the shutter button is pressed halfway.
•
In dark places, the AF Assist Lamp
Zooming stops instantaneously.
•
When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
The AF Assist Lamp does not turn on.
•
Is [AF Assist Lamp] set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
The file numbers are not recorded consecutively.
•
When you perform an operation after taking a certain action, the pictures may be recorded in
folders with different numbers from the ones used prior to the operation.
The file numbers are recorded with previously used numbers.
•
If you insert or remove the battery before turning off this unit, the folder and file numbers for the
pictures taken will not be stored in the memory. When this unit is turned on again and pictures
are taken, they may be stored under file numbers which should have been assigned to
previous pictures.
] and then select the [~] icon to set the
(P149) lights red to make it easier to focus on a subject.
(P149)
359
(P72)
(P35)