Panasonic Lumix DMC-FZ1000 Owner's Manual page 142

6. Focus and Brightness (Exposure) Settings
About [ ] ([49-Area])
Up to 49 AF areas can be focused.
This is effective when a subject is not in the center of the screen.
• The area to be focused can be set.
About [ ], etc. ([Custom Multi])
From among 49 AF areas, you can freely set the optimum shape of the AF area for the
subject. (P143)
About [ ] ([1-Area])
The camera focuses on the subject in the AF area on the center of the screen.
• Position and size of the AF area can be changed.
•
When the subject is not in the center of the composition in [Ø], you can bring the subject into
the AF area, fix the focus and exposure by pressing the shutter button halfway, move the
camera to the composition you want with the shutter button pressed halfway, and then take the
picture. (Only when the Focus Mode is set to [AFS].)
About [ ] ([Pinpoint])
You can achieve a more precise focus on a point that is smaller than [Ø].
•
The focus position can be set on an enlarged screen.
•
If the shutter button is pressed halfway, the screen for checking the focus position will be
enlarged.
•
The time for which the display is enlarged can be set using [Pinpoint AF Time] in the [Custom]
menu. (P147)
•
In the following case, [
–
When recording motion pictures
•
It cannot be set to [
–
[AFF]/[AFC] (focus mode)
(P145)
] operates as [Ø]
] in the following cases.
(P145)
(P146)
142