Using The Viewfinder; [Lvf] Button (Switching The Monitor/Viewfinder); Picture Playback - Panasonic Lumix DMC-FZ1000 Owner's Manual

3. Basic Operation

Using the Viewfinder

[LVF] button (Switching the Monitor/Viewfinder)

Press [LVF] to switch between the Monitor and Viewfinder.
A Eye sensor
[LVF]/[Fn5] button can be used in two ways, as [LVF] or as
[Fn5] (function 5). At the time of purchase, it is initially set
to [LVF/Monitor Switch].
•
Refer to P44 for details about the function button.
Press [LVF].
•
The monitor/viewfinder will switch as follows:
Automatic viewfinder/
monitor switching
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated.
•
You can also switch between the viewfinder and the monitor in [LVF/Monitor Switch] in [Eye
Sensor] in the [Custom] menu.
∫
Using the eye sensor to switch between the Monitor and Viewfinder
Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the
viewfinder automatically when you bring your eye or an object near it.
•
Eye sensor might not work properly depending on the shape of your eyeglasses, the way you
hold the camera, or bright light shining around the eyepiece. In that case, press [LVF] to switch
the display.
•
During motion picture playback or a slide show, the camera does not automatically switch the
display to the Viewfinder with the eye sensor.
• You can set the eye sensor sensitivity in [Eye Sensor] in the [Custom] menu.
Viewfinder display
¢
(P58)
(P58)
¢
57
Monitor display
(P58)