Panasonic Lumix DMC-FZ1000 Owner's Manual page 257

12. Using the Wi-Fi function
When using an SSID and password to set up a connection
1 Turn on the Wi-Fi function in the setting menu of the smartphone.
2 Select the SSID displayed on the screen of the
camera.
3 Enter the password displayed on the screen of the
camera.
(Only when connecting for the first time)
4 Start "Image App".
If you are using an Android device
When scanning the QR code to set up a connection
1 Start "Image App".
2 Select [QR code].
3 Using "Image App", scan the QR code displayed
on the screen of the camera.
• If you press [MENU/SET] on the camera, the QR
code will be enlarged. When it is difficult to scan
the QR code, try enlarging it.
(If the scanning is not successful, move the
camera and the smartphone further away from
each other and try again or use a connection
method other than the QR code method.)
When using an SSID and password to set up a connection
1 Start "Image App".
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the
camera.
4 Enter the password displayed on the screen of
the camera.
(Only when connecting for the first time)
•
If you mark the box that enables the smartphone to display the password, you
can see the password as you enter it.
(P254)
(P254)
(P254)
257
Wi-Fi
0123456789ABC