Panasonic Lumix DMC-FZ1000 Owner's Manual page 178

7. Shutter and Drive Settings
8
Press the shutter button fully.
•
The recording starts automatically.
•
During recording standby, the power will turn off automatically if no operation is performed
for a certain period. The Time Lapse Shot is continued even with the power turned off.
When the recording start time arrives, the power turns on automatically.
To turn on the power manually, press the shutter button halfway.
•
If [Fn2] is pressed while this unit is turned on, a selection screen asking you to pause or
end will be displayed. Operate in accordance with the screen. Also, if [Fn2] is pressed
during the pause, a selection screen asking you to resume or end will be displayed.
Pressing the shutter button fully will also enable you to resume from the pause.
•
Confirmation screen for creating a motion picture is displayed next, so select [Yes].
9
Select the methods for creating a motion picture.
•
The recording format is set to [MP4].
[Rec Quality]
[Frame Rate]
[Sequence]
10
Select [OK] with 3/4, and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes]
is selected.
•
Motion pictures can also be created from [Time Lapse
Video] in the [Playback] menu.
∫
Changing the Time Lapse Shot settings
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
Sets the quality of a motion picture.
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will be.
¢
[60fps] /[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
(P240)
178