Table of Contents
Advertisement
Duplex Printing
The illustration below shows the difference between these two types.
To use tumble duplex, duplex must also be selected.
Side 1
Side 2
Side 1
Side 2
Portrait
Landscape
DUPLEX
Side 1
Side 2
Side 1
Side 2
Portrait
Landscape
TUMBLE DUPLEX
Selecting the Default Duplexing
The system administrator chooses the default settings (On or Off) for
the duplex and tumble duplex options from the control panel or from a
console. It is recommended that both duplex options be set to Off and
that duplexing or tumble duplexing be selected by the application, the
QMS DOC duplex command, or by a network print command. (See
the system administrator's guide for additional information.)
Printing Your Files
5-13
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Advertisement
Table of Contents
