Table of Contents
Advertisement
Chapter 2
10. Press the top of the toner cartridge until the cartridge latches
securely in place.
11. Grasp the tab on the top of the toner cartridge.
12. Hold the toner cartridge in place with one hand as you pull the
tab and attached clear tape straight up and completely out of
the cartridge (fig. 2.12) using the other hand. Then discard the
tab and tape.
Fig. 2.12 Remove Sealing Tape (rear view)
13. Repeat steps 1-12 to load the cyan, then the magenta, and
finally the yellow developer and toner cartridges, making sure
each toner cartridge is loaded onto the corresponding
developer cartridge.
2 - 1 8
I n i t i a l P r i n t e r S e t u p
Advertisement
Table of Contents
