Table of Contents
Advertisement
Chapter 4
STARTUP OPTIONS
DO ERROR HANDLER
Fig. 4.9 Startup Options Submenu
Administration/Startup Options/Do Start Page
This option allows you to enable and disable the start-up page.
Choices are yes and no. The factory default is yes.
Administration/Startup Options/Do Sys Start
If you have a hard disk and Do Sys Start is enabled, whenever the
printer is turned on, the controller checks the hard disk for a
SYS\START file and executes this file. Choices for Do Sys Start
are yes and no. The factory default is yes. More information on
creating a SYS\START file is available in the QMS Crown
Technical Reference (an optional manual available from your QMS
vendor) and from Q-FAX. See appendix A, "QMS Customer
Support," for information on Q-FAX.
Administration/Startup Options/Do Error Handler
When this option is enabled, if a PostScript error occurs during a
PostScript print job, a page is generated reporting the error. This
information is used by QMS technicians (or users familiar with
4 - 4 0
ADMINISTRATION
STARTUP OPTIONS
Select
Previous
Previous
STARTUP OPTIONS
DO START PAGE
Next
STARTUP OPTIONS
DO SYS START
P r i n t e r C o n f i g u r a t i o n
Advertisement
Table of Contents
