Prevent/Allow Medium Removal - IBM Ultrium Internal Tape Drive T200 Reference Manual

PREVENT/ALLOW MEDIUM REMOVAL

The PREVENT/ALLOW MEDIUM REMOVAL command is used to prevent
accidental removal of the medium while it is required by an initiator.
If the Prevent flag is set, then eject requests from the front panel are ignored and
Unload commands give Check Condition status. The Sense Key is set to Illegal
Request and the ASC/ASCQ to Medium Removal Prevented (5302).
All initiators that have prevented medium removal must enable it before the medium
can be removed from the drive.
Table 47. PREVENT/ALLOW MEDIUM REMOVAL Command
7 6
0
1 Logical Unit Number (0)
2
3
4
5
5 4 3
Operation Code (1Eh)
Reserved
Reserved
Reserved
Control
2 1
Reserved
Prevent
Chapter 2. Command Support
0
41