Chapter 4. Removing The 7208 Tape Drive; Removal Checklist - IBM 7208 Setup And Operator Manual

4.0 Chapter 4. Removing the 7208 Tape Drive
This topic describes how to remove the 7208 Tape Drive Model 342 after it has been installed.
+------------------------------------------------------------------------+
¦ ¦ DANGER
¦ ¦ +------------------------------------------------------+ ¦
¦ PICTURE 29 ¦ ¦ To prevent a possible electrical shock when adding
¦ ¦ ¦ or removing any devices to or from the system,
¦ ¦ ¦ ensure that the power cords for those devices are
¦ ¦ ¦ unplugged before the signal cables are connected or
¦ ¦ ¦ disconnected. If possible, disconnect all power
¦ ¦ ¦ cords from the existing system before you add or
¦ ¦ ¦ remove a device. (72XXD203)
¦ ¦ +------------------------------------------------------+ ¦
¦ ¦
+------------------------------------------------------------------------+
Attention: Damage as a result of improper handling may void your equipment warranty.
Subtopics

4.1 Removal Checklist

7208 Tape Drive Setup and Operator Guide

Chapter 4. Removing the 7208 Tape Drive

¦ Copyright IBM Corp. 1998
4.0 - 1
¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦ ¦
¦