Rewind - IBM Ultrium Internal Tape Drive T200 Reference Manual

REWIND

The REWIND command causes the logical position to be set to BOM.
If the Immediate (Immed) flag is set to 1, then the drive validates the command and
waits for any previous command from any server to complete, including any
immediate commands that are currently being processed. It also waits for any
buffered data to be flushed to tape. It then reports a deferred error for any
preceding command or buffered data, if appropriate. If there is no deferred error,
the drive reports Good status and initiates the command. If the Immediate (Immed)
flag is set to 0, status is not returned until after the command has completed.
64
Ultrium Internal Tape Drive and 3580 Ultrium Tape Drive: SCSI Reference
Table 82. REWIND Command
7 6
0
1 Logical Unit Number (0)
2
3
4
5
5 4 3
Operation Code (01h)
Reserved
Reserved
Reserved
Reserved
Control
2 1 0
Immed