Controlling The Ptz Camera With Your Dvr; Controlling A Ptz Camera (Local Dvr) - Lorex LZV2722 Instruction Manual

6
Controlling the PTZ Camera with
your DVR
You can connect the PTZ camera to a DVR to control the camera's movement. The cam-
era can accept PTZ commands directly through the video cable, so there is no need to
run special wiring (for example, RS-485).
NOTE
For the latest list of compatible DVRs, please visit www.lorextechnology.com/support.
To connect the PTZ camera to a DVR:
1. Connect the camera video cable to one of the Video IN ports on the system.
2. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
3. Click >Setting>Pan/Tilt/Zoom.
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under Control Mode, select HDCVI.
6. Under Protocol, select DH-SDI.
7. Click OK. You can now control your PTZ camera using the system.

6.1 Controlling a PTZ Camera (Local DVR)

1. In Live View, double-click the channel that has the PTZ camera connected to open in
full-screen.
2. Right-click and click Pan/Tilt/Zoom. Enter the system user name and password if
prompted. The PTZ menu opens.
3. Use the on-screen PTZ controls to control the camera.
#LX400025; r.30544/30780; en-US
12