Setting; Changing The Settings; Defining Or Modifying A Timer Program - REMEHA iSense Installation And Service Manual

4. Setting

4 Setting
4.1

Changing the settings

11
4.1.1.

Defining or modifying a timer program

Time MO TU WE
20℃ 20℃ 20℃ 20℃ 20℃
7:00
15℃ 15℃
9:00
11:00
13:00
15:00
17:00
19:00 21℃ 21℃ 21℃ 21℃ 21℃
21℃
21:00
23:00 15℃ 15℃ 15℃
0:00
The timing program automatically controls the room temperature on
the basis of set time intervals and can be separately regulated for
each day of the week. You can adjust the default clock program or
enter a completely new program.
The controller starts pre-heating prior to the set time by
default. This allows the room to reach the desired
temperature at the correct time. To change the pre-heating
setting ¼ "Central heating settings", page 20.
Setting the clock program indirectly determines when DHW
standby is active ¼ "Controlling the tap water
temperature", page 18.
Summary table
It is useful to draw up your own overview with switch times (What
temperature does it need to be and when in your home ?).
This of course depends on who is at home and when, and what time
you get up, etc. You can set 6 switch times per day. See the table on
this page.
Creating a new clock program
1. Select in the controller: Menu > Program > Clock prog. > New.
2. Select an initial program if appropriate (Home in daytime, Home
midweek or Home at weekends). You can now create your own
clock program based on this program. Press button C to confirm.
3. Go to the day you want to set the clock program for. Press button
C to confirm.
TH FR SA SU
15℃ 15℃ 20℃ 20℃
15℃
15℃
15℃ 15℃ 15℃
iSense
030211 - 120666-AG