Messages; Error Messages - REMEHA iSense Installation And Service Manual

iSense
7

Messages

7.1

Error messages

N o c o n n e c t i o n
t o o u t s i d e
s e n s o r
M e n u
Error codes Fault indication
c and Z are lit
F200
up.
No connection to
outside sensor
c is lit up.
F203
Faulty connection to
boiler
c is lit up.
F214
Incorrect room
temperature reading
c is lit up.
F215
Controller failure
w and c are lit
F216
up.
F219
No connection with
base station (Only
controller RF).
Wait for RF sensor
F227
Wait for RF sensor
030211 - 120666-AG
This is what a fault message or service message looks like:
P r o g r a m
Display text
No connection to outside
sensor.
Communication error.
Check the connection.
Room temperature is out of
measuring range or sensor
is defective.
Internal fault. Controller
failure.
Wireless communication
fault.
Wait for RF sensor
information. This may take
15 mins.
Fault indication
Display text
T000063-04-A
Solution
Check the boiler's connection to the outside
temperature sensor.
Check the connection to the boiler.
Room temperature measurement is incorrect.The
temperature sensor may be defective if the room
temperature is between -5℃ and 65℃.
Contact your installer.
Contact your installer.
Check whether the base station for the boiler is on
and is functioning correctly (Consult the transmitter
manual if necessary).
If there is no connection between the controller and
the base station, restore it as follows: Put the base
station in connection mode.
(Consult the transmitter manual if necessary).
Select in the controller: Menu > Settings > Users >
Connection > Base station > Connect.
If this does not solve the problem, look for another
location for the controller and/or the base station.
Or remove obstacles that could interfere with the
RF signal.
This fault code can appear after controller RF starts
again (eg after changing the batteries).
As soon as controller RF has received a message
from the connected RF sensors, the message will
disappear.
If the RF sensors fail to report, another fault code will
be displayed after 15 minutes.
7. Messages
30