Functions Of The Keys; Setting Language, Time And Date; Default Setting - REMEHA iSense Installation And Service Manual

3. Start-up
A
3.2

Setting language, time and date

3.3

Default setting

9
B
C
T000059-B
3.1.2.

Functions of the keys

The controller is menu-controlled, which means it is very simple to
operate.
It only has three buttons.
The function of button A and button B depends on the
4
task you are carrying out.
The function is shown in the display immediately
4
above the buttons.
Button C is a push-turn button.
4
You press it to confirm choices (Such as menu
4
selections).
By turning it you can perform various tasks such as
4
scrolling through menus or changing values such as
(Temperature Time Date Language).
When you connect the controller, the language selection menu
appears.
1. Select the desired language by pressing button C, and then press
button C to confirm.
2. Follow the instructions on the display to select the time, year,
month and day.
The controller is now connected and ready for use. The default clock
program is activated after installation. ¼ "Default setting", page
9
The temperature is now controlled by this clock program.
The controller automatically switches between summer
and winter time.
The controller is set to room control by default (Central heating is
controlled on the basis of the inside temperature). Weather-
compensated control of the boiler is also possible (on the basis of the
outside temperature).
Programme schedule
The default clock program sets the temperature daily as follows:
4 06.00 - 19.00: 20℃
4 19.00 - 23.00: 21℃
4 23.00 - 06.00: 15℃ + T
iSense
030211 - 120666-AG