Table of Contents
Advertisement
2. Select the following options (Figure 7-103):
– From the Check Category drop-down menu, select Service Check. The
screen will refresh and the Check Type should be set to Service Status.
– Check Name should be set to SCM_Service.
– Service Name should be set to jacservice.
– Operator should be set to running.
– Check Description should be set to SCM_Service.
– Operating System should have Windows XP checked.
Figure 7-103 Security Compliance Manager Service check
3. Click Add Check.
4. Repeat steps 1 and 2, using the following information:
– From the Check Category drop-down menu, select Registry Check. The
screen will refresh and the Check Type should be set to Registry Value.
– Check Name should be set to CCA_Compliance.
– From the Registry Key drop-down menu, select HKLM. The path should
be entered as:
\SOFTWARE\Cisco\Clean Access Agent
Chapter 7. Network enforcement subsystem implementation
335
Advertisement
Table of Contents
