Table of Contents
Advertisement
To use a self-signed certificate, perform the following steps:
1. Click Generate Self-Signed Certificate in the Cisco Secure ACS
Certificate Setup window (Figure 7-6).
Figure 7-6 Generating self-signed certificate
2. Fill in the blanks with the appropriate information according to your own
installation. Be sure to enable
used here:
– Certificate subject: cn=iisscn_demo
– Certificate file: c:\certs\iisscn_demo.cer
– Private key file: c:\certs\iisscn_demo.pvk
– Key length: 2048 bits
– Digest to sign with: SHA1
3. Click Submit.
Chapter 7. Network enforcement subsystem implementation
Install generated certificate
. In the example
221
Advertisement
Table of Contents
