Table of Contents
Advertisement
To import Security Compliance Manager attributes, perform the following steps:
1. Copy the Security Compliance Manager attributes definition file to a directory
accessible to the Cisco Secure ACS. Example 7-1 shows the content of the
Security Compliance Manager attribute definition file for information
purposes. We strongly urge you not to modify this file.
Example 7-1 Security Compliance Manager attributes
[attr#0]
vendor-id=2
vendor-name=IBM Corporation
application-id=50
application-name=SCM
attribute-id=00020
attribute-name=Policy Version
attribute-profile=in out
attribute-type=string
[attr#1]
vendor-id=2
vendor-name=IBM Corporation
application-id=50
application-name=SCM
attribute-id=00021
attribute-name=Violation count
attribute-profile=in out
attribute-type=unsigned integer
[attr#2]
vendor-id=2
vendor-name=IBM Corporation
application-id=50
application-name=SCM
attribute-id=00010
attribute-name=Action
attribute-profile=out
attribute-type=String
2. Open a command prompt and change to the directory containing CSUtil.exe.
If you install Cisco Secure ACS in the default location, the CSUtil.exe is
located in the C:\Program Files\CiscoSecure ACS v4.0\Utils directory.
3. Add the Security Compliance Manager attributes to ACS by running:
csutil.exe -addavp filename
224
Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
Advertisement
Table of Contents
