Table of Contents
Advertisement
15.The end user is advised of successful login to the network (Figure 7-123).
Figure 7-123 Successful login
This concludes the basic configuration requirements for the CAREx on the CAM.
7.2.3 Deployment of the network infrastructure
In this section we describe how to configure the Cisco Catalyst 3750 switch for
implementation in a NAC Appliance environment.
Configuring Cisco 3750 switch for NAC Appliance
NAC Appliance OOB only works with Cisco switches. If you are using hardware
other than Cisco, this solution can still be deployed, but as in-band, which is
beyond the scope of this book. For more information about switch compatibility
for NAC Appliance refer to:
http://www.cisco.com/en/US/partner/products/ps6128/products_device_support_
table09186a00806f65fb.html
Example interface configuration for a NAC Appliance client:
interface FastEthernet1/0/12
description **Test CCA Client port**
switchport access vlan 20
switchport mode access
snmp trap mac-notification added
spanning-tree portfast
!
352
Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
Advertisement
Table of Contents
