Table of Contents
Advertisement
Heritage Series ADSL Bridge/ Router
strin
option host-name
g;
This option specifies the name of the client. The name may or may not
be qualified with the local domain name (it is preferable to use the
domain-name option to specify the domain name). See RFC 1035 for
character set restrictions.
uint1
option boot-size
6;
This option specifies the length in 512-octet blocks of the default boot
image for the client.
strin
option merit-dump
g;
This option specifies the path-name of a file to which the client's core
image should be dumped in the event the client crashes. The path is
formatted as a character string consisting of characters from the NVT
ASCII character set.
strin
option domain-name
This option specifies the domain name that client should use when
resolving hostnames via the Domain Name System
ip-addres
option swap-server
This specifies the IP address of the client's swap server.
strin
option root-path
g;
This option specifies the path-name that contains the client's root disk.
The path is formatted as a character string consisting of characters
from the NVT ASCII character set.
fla
option ip-forwarding
g;
This option specifies whether the client should configure its IP layer
for packet forwarding. A value of 0 means disable IP forwarding, and
a value of 1 means enable IP forwarding.
option non-local-source-routing
This option specifies whether the client should configure its IP layer
to allow forwarding of datagrams with non-local source routes. A
value of 0 means disallow forwarding of such datagrams, and a value
of 1 means allow forwarding.
DHCP Server Operation
g;
s;
fla
g;
8-13
Advertisement
Table of Contents
